Dr. Josh C. Simmons: "He Got Neuralink Implant #2. Days Later He Was Designing Parts in CAD". Facts on this page cite the primary sources below, not the video.

The claim: Neuralink patients can now do anything on a computer.

The proof: On Thursday, Nov. 12, 2026, YouTuber Dr. Josh C. Simmons published a 50-minute interview with Alex Conley, the second person to get a Neuralink implant (July 2024). According to the episode's own notes, Conley designs 3D-printed parts in Fusion 360, wrote Arduino code with ChatGPT with no coding experience, flies an RC plane (he says he's crashed it every time), and has 5 clicks mapped to his 5 fingers. His calibration time dropped from about 30 minutes to 10. That is a lot. It's also one man's account on a podcast, not trial data, and the same notes list something he still can't get working.

Editorial Thesis

Most Neuralink news is a short clip of a single demo. This is the opposite: a long conversation with someone who has lived with the implant for more than two years. The useful number isn't speed. It's setup time. If calibration really fell from about 30 minutes to about 10, that is less time each day spent getting ready to use the computer and more time using it. That's the kind of everyday detail trials need to measure, and haven't published yet.

Honest Verdict

  • Confirmed (Neuralink, Aug. 21, 2024): Alex was the second PRIME participant, implanted in July 2024. On day two he used Fusion 360 to design a charger mount that was 3D printed. Neuralink was mapping his intended movements to left, right and middle clicks.
  • Said in the interview (per the episode description and chapters): calibration down from about 30 minutes to 10; 5 clicks mapped to 5 fingers; a tank-tread wheelchair he reprogrammed; Arduino code written with ChatGPT; RC plane flights; the Neuralink signal fed through a Quadstick so Windows treats it as a joystick.
  • Confirmed (Neuralink): the N1 implant has 1,024 electrodes on 64 threads. The episode calls them sensors.
  • Small mismatch: the episode says his first Fusion 360 part came "three or four days" after the implant was switched on; Neuralink's 2024 post says day two. We say "within days."
  • Not shown: independent measurement of his calibration time, or how typical it is across Neuralink's participants.

What he's doing with it

The episode's chapter list reads like a workshop log. There's the RC transmitter box that got him building again, flying an RC plane on code he wrote with ChatGPT, an open-source CAD app, a Shark vacuum, and games including Farming Simulator, Factorio and War Thunder. He also talks about working with Neuralink's team on Webgrid, the grid game the company uses to test cursor control, and about "bits per second," the speed measure Neuralink reports.

Not everything works. The notes say he still hasn't beaten the PS5 remote-play handshake. Near the end there's a chapter titled "When are you gonna walk again?" The implant doesn't do that. It lets him control computers and devices.

Why calibration time matters

Calibration is the daily warm-up where the system re-learns how a person's brain signals map to cursor movement. Thirty minutes a day is a real chore. Ten minutes is much easier to live with. Neuralink has talked about cutting calibration time before. Here, a long-time participant describes what that looks like day to day. It would be stronger with Neuralink's own numbers across participants.

What this does not prove

  • It is not trial data. It's one participant's account in a podcast.
  • It does not prove every participant calibrates in about 10 minutes.
  • It is not FDA approval. The N1 is still investigational.
  • It does not restore movement. Conley still drives his wheelchair and devices through the implant and other controls.
  • We could not pull a full transcript; figures come from the episode's published description and chapter list.

What to watch next

  1. Neuralink publishing calibration times across participants, not just one person's.
  2. Whether Neuralink adds game console support (the PS5 issue) for more participants.
  3. Conley's own posts on X (@Bcidesign) and MakerWorld, where he shares his 3D-print files.

Bottom Line

Alex Conley's interview is the clearest long-form look yet at what Neuralink's second patient does with the implant two years in: CAD, code, an RC plane, and calibration down from about 30 minutes to 10. Believe it as his account, backed in part by Neuralink's own 2024 update. Don't treat it as trial results or as a sign the implant restores movement.

Source notes

Interview details from Dr. Josh C. Simmons's Nov. 12 episode description and chapter list (the full transcript wasn't available to us). Implant date, day-two Fusion 360 part and click mapping from Neuralink's Aug. 21, 2024 blog post. Electrode count from Neuralink. Alternate video: Bradford Smith's "Neuralink This Week, Ep. 4" (Nov. 11), which covers Conley's homemade RC radio at 2:18.

Sources